Spydr Chassis Kit for UTB18

Welcome to Killr Chassis

We've been working tirelessly to test and produce the best flat rail chassis kit available! Introducing the Spydr Chassis Kit for the Axial UTB18. This kit allows you to put your 1/18 Capra drivetrain into a flat rail chassis.

Performance features:
- 18 shock mounting options
- 10 upper link mounting options
- CNC flat-bottom delrin skid
- Reversible skid
- Infinitely adjustable transmission mount
- Boat side sliders
- 5.55° skid angle
- Lightweight carbon fiber chassis rails
- Forward battery tray
- MJF printed components
- Modular chassis components
- Increased antisquat geometry
- Adjustable magnetic body mounts

If you're looking to take your UTB18 to the next level, the Spydr Chassis Kit is for you! We've designed this chassis to allow you to tune the driving experience to your liking. With a 5.55° angled delrin skid and aggressive boatside sliders, there's nothing stopping the Spydr from gliding through the toughest lines. We've made the upper link mounts adjustable which will allow you to adjust the suspension geometry depending on your setup. The Spydr Chassis Kit features our infinitely adjustable transmission skid. This skid is slotted, allowing you to adjust the placement of your motor and transmission within the chassis. The skid and transmission are reversible if you'd like to run the motor forward mounted and tucked low in the chassis.

The kit includes:
2x Spydr CF Chassis Rails
1x Delrin Flat Skid
1x Transmission Adapter
1x Battery/Electronics Tray
3x Chassis Braces
2x Boatside Sliders
2x Body Mounts
8x Neodymium Magnets
2x Link Spacers
4x Shock Spacers
4x M3 Nuts
4x M3x20mm Screws

Similar to our Spectr chassis, we've teamed up with Flub RC to make the first hardbody integrated flat rail package for the UTB18 platform. There will be a range of incredibly detailed body options from Flub RC that will work flawlessly with our Spydr Chassis Kit.

Flub RC:
www.flubberstufferz.myshopify.com

Flub RC Hilux for Spydr Chassis:
www.flubberstufferz.myshopify.com/collections/spyder-utb18-hilux

Spydr Install Guide:
www.killrchassis.com/post/1131591278213/how-to-assemble-your-spydr-chassis-kit


*Things to consider*
- Included transmission adapter (orange) is required to prevent deformation of the skidplate.
- M3x8mm hardware is required to mount braces, body mounts, & trays.
- Link spacers are not required for all setups. Use as needed. Spacers should be placed between the lower link ends at the skidplate.
- The Spydr chassis is compatible with stock UTB18 links.
- Product images show chassis kit assembled with 2 electronics trays to demonstrate modularity. The chassis kit includes 1 electronics tray.